Gas Industrial Products

BRONZE SIGHT FLOW INDICATOR SINGLE WINDOW SCREWED ENDS

A sight flow indicator provides a window into a process pipeline that allows operators a visual means of verifying liquid flow and flow direction. Simple and low-cost, it also allows operators to observe the color, clarity, consistency, viscosity and other characteristics of process fluids.

BRONZE SAFETY VALVE RIGHT ANGLE ENCLOSED DISCHARGE FLANGE ENDS

A safety valve is a valve that acts as a fail-safe. An example of safety valve is a pressure relief valve (PRV), which automatically releases a substance from a boiler, pressure vessel, or other system, when the pressure or temperature exceeds preset limits.

BRONZE SAFETY VALVE OPEN DISCHARGE SCREWED ENDS

A safety valve is a valve that acts as a fail-safe. An example of safety valve is a pressure relief valve (PRV), which automatically releases a substance from a boiler, pressure vessel, or other system, when the pressure or temperature exceeds preset limits.

BRONZE PRESSURE GAUGE COCK SCREWED ENDS

The gauge cocks isolate the gauge from pressure media for inspection, maintenance, calibration purposes and can replacement. This gauge cock can be used to isolate the gauge from the process or to bypass the process for maintaining the gauge

BRONZE SAFETY VALVE POP TYPE OPEN DISCHARGE SCREWED ENDS

A safety valve is a valve that acts as a fail-safe. An example of safety valve is a pressure relief valve (PRV), which automatically releases a substance from a boiler, pressure vessel, or other system, when the pressure or temperature exceeds preset limits.

BRONZE SAFETY VALVE POP TYPE OPEN DISCHARGE FLANGE ENDS

A safety valve is a valve that acts as a fail-safe. An example of safety valve is a pressure relief valve (PRV), which automatically releases a substance from a boiler, pressure vessel, or other system, when the pressure or temperature exceeds preset limits.

BRONZE SAFETY VALVE RIGHT ANGLE POP TYPE OPEN ENCLOSED DISCHARGE FLANGE ENDS

A safety valve is a valve that acts as a fail-safe. An example of safety valve is a pressure relief valve (PRV), which automatically releases a substance from a boiler, pressure vessel, or other system, when the pressure or temperature exceeds preset limits.

BRONZE SAFETY VALVE RIGHT ANGLE POP TYPE ENCLOSED DISCHARGE SCREWED ENDS

A safety valve is a valve that acts as a fail-safe. An example of safety valve is a pressure relief valve (PRV), which automatically releases a substance from a boiler, pressure vessel, or other system, when the pressure or temperature exceeds preset limits.

BRONZE INSPECTORS TEST GAUGE COCK SCREWED ENDS

BRONZE INSPECTORS TEST GAUGE COCK SCREWED ENDS IBR APPROVED COLOR-GOLDEN SUITABLE FOR-WATER&STEAM

BRONZE FUSIBLE PLUG LOCO TYPE SCREWED ENDS

A fusible plug is a threaded metal cylinder, often made from bronze, brass or gunmetal, which has a tapered hole drilled completely through its length. This hole is sealed with a metal of low melting point that flows away if a pre-determined, high temperature is reached.

BRONZE SAFETY VALVE RIGHT ANGLE ENCLOSED DISCHARGE SCREWED ENDS

A safety valve is a valve that acts as a fail-safe. An example of safety valve is a pressure relief valve (PRV), which automatically releases a substance from a boiler, pressure vessel, or other system, when the pressure or temperature exceeds preset limits.

BRONZE PRESSURE REDUCING VALVE DIAPHRAGM TYPE SCREWED ENDS

A Pressure Reducing Valve is self- actuated to keep downstream, or upstream pressure regulated. The foremost function of these control valves is to convert the higher pressure into a much lower pressure. They are widely employed in the water, steam, and oil and gas industries.

BRONZE FUSIBLE PLUG 2PIECE DESIGN SCREWED ENDS

A fusible plug operates as a safety valve when dangerous temperatures, rather than dangerous pressures, are reached in a closed vessel. Fusible plugs are commonly installed in aircraft wheels, most typically in those of larger or high-performance aircraft.

BRONZE PARALLEL SLIDE BLOW OFF VALVE FLANGED ENDS

A parallel slide gate valve is a type of valve used to control fluid flow in a piping system. The valve is made of two discs that are connected through a stem. It is mainly used for regulating fluid flow in oil and gas applications. These types of valves are easy to disassemble, clean, and repair.

BRONZE THERMODYNAMIC STEAM TRAP SCREWED ENDS

This type of steam trap operates by the internal energy and pressure of steam. Condensate that reaches to trap raise the disc and open the orifice and flow continuously by the help of the steam pressure which is behind the condensate through the discharge orifice. IBR APPROVED

BRONZE VERTICAL NRV 2PIECE DESIGN SCREWED ENDS

Non return valves are an important component in air systems and can be found anywhere in a circuit. Their function is to open in order to allow air to flow in and to stop air further downstream leaking back. Small, and often simply designed, non return valves are lightweight components.

BRONZE VERTICAL NRV 2PIECE DESIGN FLANGED END

Non return valves are an important component in air systems and can be found anywhere in a circuit. Their function is to open in order to allow air to flow in and to stop air further downstream leaking back. Small, and often simply designed, non return valves are lightweight components.

BRONZE FUSIBLE PLUG 1PIECE DESIGN SCREWED END

A fusible plug operates as a safety valve when dangerous temperatures, rather than dangerous pressures, are reached in a closed vessel. Fusible plugs are commonly installed in aircraft wheels, most typically in those of larger or high-performance aircraft.

BRONZE Y TYPE STRAINER FLANGED ENDS

The y shaped strainer is good for use with high velocity liquid flows as it has an angled collection bottom which captures the filtered particles. The Stainless Steel Y Type Strainer is used in wastewater management, pollution control and in slurry removal systems.

BRONZE Y TYPE STRAINER SCREWED ENDS

The y shaped strainer is good for use with high velocity liquid flows as it has an angled collection bottom which captures the filtered particles. The Stainless Steel Y Type Strainer is used in wastewater management, pollution control and in slurry removal systems

BRONZE AUXILIARY STEAM STOP VALVE FLANGED ENDS (TABLE-F)

The stop valves (SVA) are used to shut off flow of hot or cold water in plumbing fixture. Stop valve is a valve system which is designed to stop flow of liquid through a pipe it is generally used in important machinery or a human workstation

BRONZE AUXILIARY STEAM STOP VALVE FLANGED ENDS (TABLE-H)

The stop valves (SVA) are used to shut off flow of hot or cold water in plumbing fixture. Stop valve is a valve system which is designed to stop flow of liquid through a pipe it is generally used in important machinery or a human workstation

BRONZE AUXILIARY STEAM STOP VALVE SCREWED ENDS

The stop valves (SVA) are used to shut off flow of hot or cold water in plumbing fixture. Stop valve is a valve system which is designed to stop flow of liquid through a pipe it is generally used in important machinery or a human workstation.

BRONZE HORIZONTAL LIFT CHECK VALVE FLANGED ENDS

flanged end swing check valve is a one way flange check valve that allows fluids to flow in one direction only. When fluids flow from entering port, disc will be push up and fluids will pass through the check valve. It also prevent the back flow from hydraulic system. IBR APPROVED

BRONZE SLEEVE PACKED WATER LEVEL GAUGE FLANGED ENDS

A gauge is a metric that represents a single numerical value that can arbitrarily go up and down. Gauges are typically used for measured values like temperatures or current memory usage, but also "counts" that can go up and down, like the number of concurrent requests.

BRONZE HORIZONTAL LIFT CHECK VALVE SCREWED END

Check valves are one-way or nonreturn valves that open with fluid movement and pressure, and close to prevent backflow of the pressure to upstream equipment such as pumps and compressors. In fact, check valves allow the fluid to flow in only one direction.

BRONZE GLOBE STEAM STOP VALVE FLANGED END (TABLE-F)

A flange globe valve is a valve where the closure part (valve flap) moves along the centerline of the valve seat. According to this form of movement of the valve flap, the change of the valve seat port is proportional to the stroke of valve flap.

BRONZE GLOBE STEAM STOP VALVE FLANGE END (TABLE-H)

A flange globe valve is a valve where the closure part (valve flap) moves along the centerline of the valve seat. According to this form of movement of the valve flap, the change of the valve seat port is proportional to the stroke of valve flap.

BRONZE BALL VALVE 2PIECE DESIGN FLANGE END

Description: A Flange end ball valve is a full bore ball valve with a flanged connection. The usage of the flange end ball valve is to allow or stop the flow in the pipeline system and ensure the pressure within a pipeline system or process.

BRONZE BALL VALVE 2PIECE DESIGN SCREWED ENDS

ball valve is a shut off valve that controls the flow of a liquid or gas by means of a rotary ball having a bore. By rotating the ball a quarter turn (90 degrees) around its axis, the medium can flow through or is blocked.

BRONZE GLOBE STEAM STOP VALVE SCREWED ENDS

A Globe valve is a linear motion valve and are primarily designed to stop, start and regulate flow. The disk of a Globe valve can be totally removed from the flowpath or it can completely close the flowpath. Conventional Globe valves may be used for isolation and throttling services. IBR APPROVED

BRONZE BALL VALVE WITH STRAINER 1PIECE DESIGN SCREWED ENDS

Integrated isolating ball valve and Y strainer unit used primarily with condensate blow down solenoid valves. The strainer protects the valve from debris (scale etc from receiver) while the isolating ball valve allows the air to be isolated while the Y strainer is cleaned.

FORGED BRASS BALL VALVE 2PIECE DESIGN SCREWED END

ball valve is a shut off valve that controls the flow of a liquid or gas by means of a rotary ball having a bore. By rotating the ball a quarter turn (90 degrees) around its axis, the medium can flow through or is blocked.

BRONZE GLOBE VALVE YOKE TYPE SCREWED END CLASS-2

A Globe valve is a linear motion valve and are primarily designed to stop, start and regulate flow. The disk of a Globe valve can be totally removed from the flowpath or it can completely close the flowpath. Conventional Globe valves may be used for isolation and throttling services.

BRONZE HORIZONTAL LIFT CHECK VALVE FLANGE END CLASS-2

Body: Permits full swing of disc on downstream side Lower flow resistance and disc erosion. Disc: Internally-hinged No opening on the body, higher integrity. Disc secured to hinge using lock nut and pin. Disc free to rotate to avoid localized wear.

BRONZE GATE VALVE NON RISING STEM SCREWED ENDS

Gate valve is that opens by lifting a barrier (gate) out of the path of the fluid. Gate valves require very little space along the pipe axis and hardly restrict the flow of fluid when the gate is fully opened.

BRONZE VERTICAL CHECK VALVE CLASS-1

A non-return valve allows a medium to flow in only one direction and is fitted to ensure that the medium flows through a pipe in the right direction, where pressure conditions may otherwise cause reversed flow.

BRONZE GATE VALVE SCREWED END CLASS 1

A gate valve is the most common valve for water supply systems. It represents a linear-motion isolation valve and has a function to stop or allow the flow. Gate valves got their name from the closure element sliding into the flow stream to provide shutoff and, therefore, acting like a gate.

BRONZE GATE VALVE FLANGE END CLASS-1

The flange end gate valve consists of a closure element, called a wedge or disc which is allowed to permit and prevent the flow of a process fluids to flow through the valve body.

BRONZE GLOBE VALVE FLANGE END CLASS-1

A flange globe valve is a valve where the closure part (valve flap) moves along the centerline of the valve seat. According to this form of movement of the valve flap, the change of the valve seat port is proportional to the stroke of valve flap.

BRONZE GLOBE VALVE SCREWED ENDS CLASS-1

Globe valves are named for their spherical body shape with the two halves of the body being separated by an internal baffle. This has an opening that forms a seat onto which a movable plug can be screwed in to close (or shut) the valve.

BRONZE HORIZONTAL LIFT CHECK VALVE SCREWED END CLASS-1

Check valves are one-way or nonreturn valves that open with fluid movement and pressure, and close to prevent backflow of the pressure to upstream equipment such as pumps and compressors. In fact, check valves allow the fluid to flow in only one direction.

BRONZE HORIZONTAL LIFT CHECK VALVE FLANGE END CLASS-1

Body and Bonnet Cast with uniform sections, precision machined. Body: Permits full swing of disc on downstream side Lower flow resistance and disc erosion. Disc: Internally-hinged No opening on the body, higher integrity. Disc secured to hinge using lock nut and pin.

BRONZE GATE VALVE RISING STEM SCREWED END CLASS-2

Gate valve is a that opens by lifting a barrier (gate) out of the path of the fluid. Gate valves require very little space along the pipe axis and hardly restrict the flow of fluid when the gate is fully opened.

BRONZE GATE VALVE FLANGED END CLASS-2

The flange end gate valve consists of a closure element, called a wedge or disc which is allowed to permit and prevent the flow of a process fluids to flow through the valve body.

BRONZE GLOBE VALVE FLANGED END CLASS-2

A flange globe valve is a valve where the closure part (valve flap) moves along the centerline of the valve seat. According to this form of movement of the valve flap, the change of the valve seat port is proportional to the stroke of valve flap.

BRONZE GLOBE VALVE SCREWED ENDS CLASS-2

Globe valves are named for their spherical body shape with the two halves of the body being separated by an internal baffle. This has an opening that forms a seat onto which a movable plug can be screwed in to close (or shut) the valve.

BRONZE HORIZONTAL LIFT CHECK VALVE SCREWED ENDS CLASS-2

A flow check has an operating screw to allow the valve to be held open, the opposite of the control on a stop-check valve, as an aide for filling the system and for purging air from the system.

BRONZE GATE VALVE YOKE TYPE SCREWED ENDS CLASS-1

A gate valve is the most common valve for water supply systems. It represents a linear-motion isolation valve and has a function to stop or allow the flow. Gate valves got their name from the closure element sliding into the flow stream to provide shutoff and, therefore, acting like a gate.

BRONZE GATE VALVE YOKE TYPE SCREWED END CLASS-2

A gate valve is the most common valve for water supply systems. It represents a linear-motion isolation valve and has a function to stop or allow the flow. Gate valves got their name from the closure element sliding into the flow stream to provide shutoff and, therefore, acting like a gate.

BRONZE GATE VALVE YOKE TYPE FLANGE END CLASS-1

The flange end gate valve consists of a closure element, called a wedge or disc which is allowed to permit and prevent the flow of a process fluids to flow through the valve body.

BRONZE GATE VALVE YOKE TYPE FLANGE END CLASS-2

The flange end gate valve consists of a closure element, called a wedge or disc which is allowed to permit and prevent the flow of a process fluids to flow through the valve body.

BRONZE GLOBE VALVE YOKE TYPE SCREWED ENDS CLASS-1

A Globe valve is a linear motion valve and are primarily designed to stop, start and regulate flow. The disk of a Globe valve can be totally removed from the flowpath or it can completely close the flowpath. Conventional Globe valves may be used for isolation and throttling services.

GLOBE VALVE YOKE TYPE FLANGE ENDS CLASS-1

A Globe valve is a linear motion valve and are primarily designed to stop, start and regulate flow. The disk of a Globe valve can be totally removed from the flowpath or it can completely close the flowpath. Conventional Globe valves may be used for isolation and throttling services.

BRONZE GLOBE VALVE YOKE TYPE FLANGED END CLASS-2

A Globe valve is a linear motion valve and are primarily designed to stop, start and regulate flow. The disk of a Globe valve can be totally removed from the flowpath or it can completely close the flowpath. Conventional Globe valves may be used for isolation and throttling services.

BRONZE UNION COVER HORIZONTAL CHECK VALVE FLANGE END

Body and Bonnet Cast with uniform sections, precision machined. Body: Permits full swing of disc on downstream side Lower flow resistance and disc erosion. Disc: Internally-hinged No opening on the body, higher integrity. Disc secured to hinge using lock nut and pin

BRONZE GATE VALVE WITH INDICATOR PAD LOCKING ARRANGEMENT FLANGE END

The flange end gate valve consists of a closure element, called a wedge or disc which is allowed to permit and prevent the flow of a process fluids to flow through the valve body.

BRONZE GLOBE VALVE FLANGE END PN-16

A Flange end ball valve is a full bore ball valve with a flanged connection. The usage of the flange end ball valve is to allow or stop the flow in the pipeline system and ensure the pressure within a pipeline system or process.

BRONZE PRESSURE RELIEF VALVE CLOSED DISCHARGE SCREWED ENDS

The purpose of a pressure relief valve is to control or limit surges of pressure within pipelines, acting as protection for the system, and defending against instrument or equipment failure. They are usually present in clean water industries

BRONZE ANGLE GLOBE VALVE RIGHT ANGLE PATTERN

angle valve is a device used to regulate the flow of fluids or gas in a piping system. Angle valves are typically used in residential and commercial plumbing applications to regulate water flow in a piping system. Angle valves are also used in industrial applications, such as chemical processing plants

BRONZE PLUG COCK FLANGED ENDS

Plug valves are valves with cylindrical or conically tapered "plugs" which can be rotated inside the valve body to control flow through the valve. The plugs in plug valves have one or more hollow passageways going sideways through the plug, so that fluid can flow through the plug when the valve is open

BRONZE HORIZONTAL LIFT CHECK VALVE PN-16

Body and Bonnet Cast with uniform sections, precision machined. Body: Permits full swing of disc on downstream side Lower flow resistance and disc erosion. Disc: Internally-hinged No opening on the body, higher integrity. Disc secured to hinge using lock nut and pin.

BRONZE GLOBE VALVE WITH INDICATOR PAD LOCKING ARRANGEMENT FLANGE END

A flange globe valve is a valve where the closure part (valve flap) moves along the centerline of the valve seat. According to this form of movement of the valve flap, the change of the valve seat port is proportional to the stroke of valve flap.

BRONZE GATE VALVE WITH INDICATOR PAD LOCKING ARRANGEMENT

Gate valve is a that opens by lifting a barrier (gate) out of the path of the fluid. Gate valves require very little space along the pipe axis and hardly restrict the flow of fluid when the gate is fully opened.

BRONZE GLOBE VALVE WITH INDICATOR PAD LOCKING ARRANGEMENT

Globe valves are named for their spherical body shape with the two halves of the body being separated by an internal baffle. This has an opening that forms a seat onto which a movable plug can be screwed in to close (or shut) the valve.

BRONZE FOOT VALVE HOLE TYPE SCREWED ENDS

A foot valve is a type of check valve that is typically installed at a pump or at the bottom of a pipe line (hence the name). Foot valves act like ball check valves, but have an open end with a shield or screen over it to block debris from entering the line

BRONZE FOOT VALVE SCREWED END

A foot valve is a type of check valve that is typically installed at a pump or at the bottom of a pipe line (hence the name). Foot valves act like ball check valves, but have an open end with a shield or screen over it to block debris from entering the line

BRONZE VERTICAL LIFT CHECK VALVE TWO PIECE DESIGN

A flow check has an operating screw to allow the valve to be held open, the opposite of the control on a stop-check valve, as an aide for filling the system and for purging air from the system.

BRONZE VERTICAL LIFT CHECK VALVE ONE PIECE DESIGN

A flow check has an operating screw to allow the valve to be held open, the opposite of the control on a stop-check valve, as an aide for filling the system and for purging air from the system.

BRONZE SWING CHECK VALVE SCREWED END

A flow check has an operating screw to allow the valve to be held open, the opposite of the control on a stop-check valve, as an aide for filling the system and for purging air from the system.

BRONZE GATE VALVE PEGULAR TPE SCREWED ENDS

Gate valve is a that opens by lifting a barrier (gate) out of the path of the fluid. Gate valves require very little space along the pipe axis and hardly restrict the flow of fluid when the gate is fully opened.Gate valve is a that opens by lifting a barrier (gate) out of the path of the fluid. Gate valves require very little space along the pipe axis and hardly restrict the flow of fluid when the gate is fully opened.

BRONZE GATE VALVE RISING STEM SCREWED END

Gate valve is a that opens by lifting a barrier (gate) out of the path of the fluid. Gate valves require very little space along the pipe axis and hardly restrict the flow of fluid when the gate is fully opened.

BRONZE GATE VALVE NON RISING STEM FLANGE ENDS

A Flange end ball valve is a full bore ball valve with a flanged connection. The usage of the flange end ball valve is to allow or stop the flow in the pipeline system and ensure the pressure within a pipeline system or process

BRONZE ANGLE CHECK VALVE RIGHT ANGLE PATTERN SCREWED END

The swing check valve prevents backflow by automatically closing when fluid reverses direction. The bronze check valve features threaded end connections for ease of installation. The check valve is recommended for commercial and industrial steam, water, oil and gas services.

BRONZE SIGHT FLOW INDICATOR WITH MOVING IMPELLER

A sight flow indicator gives the operator a window to observe how a process fluid moves through the pipeline. At a basic level, how a sight flow indicator works is simple: just look through the window to observe the flow in a pipeline

BRONZE UNION COVER HORIZONTAL LIFT CHECK VALVE

The swing check valve prevents backflow by automatically closing when fluid reverses direction. The bronze check valve features threaded end connections for ease of installation. The check valve is recommended for commercial and industrial steam, water, oil and gas services.

BRONZE GAUGE GLASS FLANGE END

glass tube or arrangement of glass plates fitted to a gauge used to give a visual indication of the level of liquid in a tank, pressure vessel, or boiler.

BRONZE PRESSURE RELIEF VALVE OPEN DISCHARGE

Pressure relief valves are used across an array of applications in which pressure levels are critical for uninterrupted and smooth machinery performance. These include oil and gas, petrochemical, and power generation using steam, air, gas or liquid

BRONZE GLOBE VALVE FLANGE END

A flange globe valve is a valve where the closure part (valve flap) moves along the centerline of the valve seat. According to this form of movement of the valve flap, the change of the valve seat port is proportional to the stroke of valve flap.

BRONZE GLOBE STEAM STOP VALVE

Globe valves are used primarily in situations where throttling of the commodity is required. By simply rotating the handwheel, the rate at which the commodity flows through the valve can be adjusted to any desired level. Having the valve seat parallel to the line of flow is an important feature of the globe valve.

BRONZE NEEDLE VALVE

instrument needle valve uses a tapered pin to gradually open a space for fine control of flow. The flow can be controlled and regulated with the use of a spindle. A needle valve has a relatively small orifice with a long, tapered seat, and a needle-shaped plunger on the end of a screw, which exactly fits the seat.

BRONZE SIGHT FLOW INDICATOR SCREWED ENDS

A sight flow indicator provides a window into a process pipeline that allows operators a visual means of verifying liquid flow and flow direction. Simple and low-cost, it also allows operators to observe the color, clarity, consistency, viscosity and other characteristics of process fluids.

BRONZE FEED CHECK VALVE RIGHT ANGLE PATTERN

Feed Check Valves are one of the most important components of boiler which control the flow of water from feed pump to the boiler and further prevents the backflow of water from boiler to pump when the boiler pressure is more than the pump pressure or when feed pump stops working.

BRONZE GLAND COCK SCREWED END

The Bronze Plug Cock with Gland 2 Way is used in water systems that are of domestic applications. The water pipe lines can also employ different material grades such as the GG25 Cast Iron 3-Way Gland Cock Bronze and stainless steel or cast iron valves. Each different material grade has a different benefit over the other. The SS 304 Gland Cock Valves are some of the most used as they are strong and corrosion resistant with high cost efficiency. There are other types such as the Gun Metal Gland Cock Flanged or screwed depending on the end connection specification.

BRONZE UNION BONNET GLOBE VALVE

Flow characteristics of globe valves, such as the Mark One and Two, can be deter- mined by the shape of the plug head. The three most common types of flow characteristics are quick opening, equal percentage and linear.

BRONZE GAUGE GLASS

A glass tube or arrangement of glass plates fitted to a gauge used to give a visual indication of the level of liquid in a tank, pressure vessel, or boiler.

BRONZE GLOBE VALVE

A Globe valve is a linear motion valve and are primarily designed to stop, start and regulate flow. The disk of a Globe valve can be totally removed from the flowpath or it can completely close the flowpath. Conventional Globe valves may be used for isolation and throttling services.

BRONZE Y TYPE STRAINER

Y-Strainers are devices for mechanically removing unwanted solids from liquid, gas or steam lines by means of a perforated or wire mesh straining element. They are used in pipelines to protect pumps, meters, control valves, steam traps, regulators and other process equipment.

BRONZE THERMODYNAMIC STEAM TRAP SCREWED END

thermodynamic trap is an extremely robust steam trap with a simple mode of operation. The trap operates by means of the dynamic effect of flash steam as it passes through the trap, as depicted in Figure 11.4. 1. The only moving part is the disc above the flat face inside the control chamber or cap.

BRONZE HORIZONTAL LIFT CHECK VALVE

Horizontal lift check valves are used primarily for air, gas and steam services whilst swing check valves are most suitable for water and other liquids. For air, gas and low pressure applications, especially where bubble tight closure is required, a valve with rubber faced disc is necessary.

BRONZE UNION BONNET GLOBE VALVE FLANGE END

A flange globe valve is a valve where the closure part (valve flap) moves along the centerline of the valve seat. According to this form of movement of the valve flap, the change of the valve seat port is proportional to the stroke of valve flap.

Stainless Steel Butterfly Valve Union End

3 Way Valve

STAINLESS STEEL Ball Valve

STAINLESS STEEL Relief Valve Group

STAINLESS STEEL Needle Valves - Group

STAINLESS STEEL Manifold VALVE

Stainless Steel High Pressure Needle Valve

STAINLESS STEEL High Pressure Needle Valve

STAINLESS STEEL Check Valve Group

STAINLESS STEEL Milliplex Ball Valve

STAINLESS STEEL horizantal Check Valve